Company Blog
FAIL Servo Op=0100 Resp=0003 is one common error message in Seagate patient hard drives with head or platter surface damage. But sometimes, this error outputs in the COM terminal and the drive is normally accessed for data recovery and sometimes it is caused by firmware corruption.
Only with professional data recovery hardware tools, users can turn off HDD bad heads successfully and recover the lost data by the good heads. Right now more and more physically damaged hard drive data recovery cases are received with damaged heads and many of these patient HDDs have clicking noises or sometimes scratching noises.
Seagate LM Rosewood hard drive data recovery cases are more and more common in data recovery labs worldwide. Many of these data recovery cases suffer firmware corruption and some of them get physical head damage.
In the new Dolphin Samsung hdd firmware repair program, users can read and write the ROM properly and edit the head map in ROM efficiently for both Seagate Samsung hard drives and traditional Samsung hard drives.
This is one of success data recovery cases done by DFL engineer today for an Australian user. The patient drive cannot read PCB information and module list. HDD ID Patient drive: WD10TMVW-11ZSMS4 PCB:2060-771692-005 REV AFamily: HELIOS Capacity: 1TB
