This is one section for Dolphin users only and the following solutions and case studies are available by certain permission in Dolphin official forum: http://forum.dolphindatalab.com/
Users can easily find solutions and guides here for Seagate hard drive repair and data recovery.
1, How to clear Seagate F3 NGlist when traditional methods fail;
2, How To Fix LED:000000CC FAddr: 0025EE67;
3, Seagate hard drive repair manual section II;
4, Seagate hard drive repair manual section I;
5, Seagate F3 M Commands Description;
6, How To Diagnose And Fix Seagate Clicking Drives;
7, Seagate F3 short connection tip to enter Terminal mode F3 T>;
8, How to edit plist and delete abnormal defects to fix some Seagate drives full of bad sectors;
9, How to read/write/edit Seagate F3 SYS file, how to read sa, how to search sys file from sa and how to find out the track which contains the sys file;
10, How to repair Seagate 7200.11 busy hard drives;
11, How to fix error 43 and 47 by command mode;
12, How To Fix Seagate SIM Error 3005
13, Seagate F3 ST3500418AS Undetected Fix;
14, How to Fix Seagate 7200.9 Busy Problem;
15, Selftest Analysis and Tips For 7200.10 And Before for high-success-rate Seagate hdd refurbishing;
16, How to recognize the Seagate F3 Drive Families & Models & 7200.14 Models;
17, Learn about Seagate Hard Drive Firmware Modules;
18, CE Log ErrCode=43 Fix;
19, RW Err-Head Failure Error;
20, Seagate Hard Drive Structure And Repair Tips;
21, Error processing Performance Parameter File: 203C;
22, 7200.11 and .12 Firmware Module Description;
23, How To Skip Process 99 Within Seagate SF;
24, 7200.11 Capacity=0 Repair By Commands;
25, How To Find Out The Seagate F3 Shorting Points On PCB;
26, SEGATE Hard Drive Repair And Data Recovery Knowledge Base;
27, Seagate Short Connect Head Contacts On The PCB-Image guides;
28, Fix X and !!!!!! Error Scanned By MHDD;
29, How To Fix 7200.11 RW subfile error 205f;
30, ST2000DM001 PCB 100664987 Shorting Points;
31, Fixing No HOST FIS-ReadyStatusFlags 2002A1A5;
32, Common F3 terminal Commands Used;