To: The sales department Dolphin Deta lab ,
Myself, Abhishek Nath from india I am a professional hardware engineer and I want to buy your DFL-SRP All-In-One USB3.0 Data Recovery tool, can you give me the latest price of it.
And how can i buy this product in India?
Read more
This is Dolphin data recovery technique support team and this article is teaching how to recover lost data from HGST HTS541010B7E610 hard drives with DFL data recovery equipment.
Read more
Dolphin team are on the Dragon-boat festival holiday which lasts for three days from June 25 to June 27 2020 and we wish all the best to all Dolphin users.
Read more
DFL eMMC chip reader hardware has been upgraded and many users have received the new hardware from the new purchases.
Before the hardware upgrade, the eMMC chip reader supports 4 types of eMMC chips:
BGA 153/169
BGA 162/186
BGA 221
BGA 529
For these four chips, users don’t need to solder any wire, just simply put the chips correctly into the chip holder and users can read the chip data from PC.
After the upgrade, the signal interfaces are added onto the hardware and users can solder wires/signal lines to connect the other chips besides above 4 mentioned chip types. This requires good soldering skills.
After soldering the signal lines, users can connect the 162/186 SD connector to the SD card reader and then users can read the other chips too from PC.
Dolphin team keep working hard to improve all our hardware and software tools, please note: DFL eMMC chip reader all in one doesn’t contain any software, it works like one converter to connect the chips to PC and the pc will help to recognize the chips and display the data.
Any other question is welcome to sales@dolphindatalab.com or add Dolphin skype ID: dolphin.data.lab
Hello Sir, This is Kabelo from Botswana and Please for me a data Recovery Equipment with the following specifications :
Hello Dolphin Data Lab,
How are you? I have a 2tb seagate barracuda that is not accessible, it’s spinning up and then does 2 consecutive scratch like noise .
After that the disk is busy. I’ve tried to change the PCB with the exact same working PCB, I got the same noise and no data.I tried to put the original ROM on the donor PCB, now it’s not even accessible.
Dolphin Data Lab has created one video on how to recover lost data from Western Digital Palmer and Charger families.
Palmer and Charger family PCB numbers and Models:
WD10SPZX-21Z10T0 2060-800066 (SATA)
WD10SMZW-11Y0TS0 2060-800069 (USB)
This is one new IT engineer client from Brazil who wishes to enter data recovery field.
‘Hi,
This is Carlos Roberto and I have an IT security and virtualization company and I’m looking at the data recovery and disk market.
I’m thinking of starting a new data and disk recovery company, but I really do not know exactly what I need with regards to equipment and software so I can recover SATA and SAS disk data with or without RAID configuration.
Read more
This is one of success case done by DFL engineer in Korea yesterday. The user mentioned that the patient drive can spin up. But cannot get ID information, cannot back up sys file either. In the meanwhile, The terminal keep showing MCMainPORT failed error message.
HDD ID
Patient drive: ST1000DM003- 9YN162
PCB Number: 100664987
Read moreThis is one client from Peru who wishes to buy data recovery tools for iOS devices.
“Hello Dfl, Good evening!
May I inquire, if you have dfl tools for recovering iOS DEVICE? iphone, ipad, etc. both broken and software problem?
I mean, a recovery by removing the ic or iphone parts and put to thetools and did recovery?
One-stop data recovery tools and advanced data recovery training courses.
Western Digital USB-SATA PCB Package
Original price was: $369.00.$245.00Current price is: $245.00.
DFL-SRP For Hitachi HDD Firmware Repair Tool
Head and Platter Swap Package 03
Original price was: $930.00.$720.00Current price is: $720.00.