T2Data auto loading to RAM is one featured data recovery solution within DFL-DDP data recovery equipment for WD SMR hard drives. Users can find this data recovery solution within the common WD hdd repair column or disk image settings.
Dolphin DFL users can backup T2data by DFL-WD hdd repair tool or users can extract the T2data from the module 190 within DFL-DDP data recovery equipment.
When the WD SMR hard drives are all sectors 0000 or data area is not accessed, users can try to load the T2data auto to RAM for access to the data.
Here is the video on how to load T2data auto to RAM for WD SMR HDD data recovery
Any question is welcome to sales@dolphindatalab.com or add Dolphin Skype ID: dolphin.data.lab
Most WD SMR HDD data recovery cases are concerned with the second-level dynamic translator-module 190.
For example, the WD SMR HDDs are formatted, all sectors 0000, wrongly detected, no data access, etc. Users can try to backup the module 190, repair 190, load module 190 to ram to fix the issue.
For all Dolphin DFL users, it is much easier and more successful to recover WD SMR HDDs. In the video below, users can learn how to use DFL-WD firmware repair tool to backup the module 190 in different ways.
01: Double click module 190, select all hex data and then save as 190.rpm;
02: FW Operations>Read Modules>Read Module 190 by ID mode;
03: FW Operations>Read Modules>Read Module 190 by ABA mode, read copy 0 or copy 1, sometimes copy 0 fails, then try to read copy 1, sometimes if both copies fail, try read valid data only;
04: Read SA regions and users can try to extract module 190 from the SA region.
Any question is welcome to sales@dolphindatalab.com or add Dolphin Skype ID: dolphin.data.lab
For data recovery from all WD SMR HDDs, it’s necessary to learn how to read the original rom, how to generate unlock rom, how to write unlock rom and unlock firmware area, how to backup firmware resources.
Tools used for WD SMR HDD Firmware Unlock and Backup:
DFL-WD HDD firmware repair tool
HDD ROM chip pin reader
Users can learn from the video here on how to do all above
Any question is welcome to sales@dolphindatalab.com or add Dolphin Skype ID: dolphin.data.lab
This is one data recovery engineer from Afghanistan who is asking for a purchase of Dolphin DVR Pro.
‘Hello Dear Respected Sir / Madam
I hope my email meets you with good health!
I want to buy CCTV DVR NVR XVR HVR Data/ All Data Recovery Software, So I would like to know further about the Software
Is the Licence life-time ?
Can I recover old Data from years Around 4 to 5 years Data or ago ?
Can I recover 8,16,32 and 160 … Channel DVR NVR XVR HVR All Captured Videos from All Camera That Losted or Formated or may over-writted ?
Can I recover any kind or any company DVR,NVR,XVR,HVR … Data from the formatted Hard disk or Hard-Drive ?
Thanks and Regards,
CCTV Workshop
Kabul- Afghanistan’
Please note: if the videos are already overwritten, the overwritten videos cannot be recovered. Maybe only some fragmented video files are not overwritten for the past years and time.
Only if the DVR system has the channels info stored, they can be found out and listed. For formatted or deleted videos, users can use the Deep Scan option within Dolphin DVR data recovery software and get lost videos back by dates.
This is one patient HDD firmware repair and data recovery case study from one DFL user in Indonesia.
Patient HDD ID: Seagate ST9500325AS Wyatt 3C
Symptom: Capacity 0 with the following com terminal error messages:
‘Rst 0x08M
RW cmd 0002 req = 89 3E 00 00 17 02 00 00 00 00 00 00 08 8C 08 00 87 97 09 00 08 8C 08 00
opts = 00001121
RW Err = C4090082
RW cmd 0002 req = 89 3E 00 00 01 00 00 00 00 00 00 00 08 8C 08 00 87 97 09 00 08 8C 08 00
opts = 00001121
RW Err = C4090082
RW cmd 0002 req = 75 5F 02 00 17 02 00 00 00 00 00 00 08 8C 08 00 87 97 09 00 08 8C 08 00
opts = 00001121
RW Err = C4090082
RW cmd 0002 req = 75 5F 02 00 01 00 00 00 00 00 00 00 08 8C 08 00 87 97 09 00 08 8C 08 00
opts = 00001121’
To fix the capacity 0 and RW Err, users need to backup rom and firmware modules and sys files and next the engineer got partial sector access issue.
To fix the partial sector access issue for this patient hdd, users need to use the partial sector access auto fix solution, just one click to fix by DFL Seagate hdd repair tool.
Finally the data area was fully accessed by DFL-DDP data recovery equipment.
SEAGATE ST9500325AS WYATT 3C RW ERR C4090082 CAPACITY 0 PARTIAL SECTOR ACCESS HDD REPAIR AND DATA RECOVERY STEPS:
Any question is welcome to sales@dolphindatalab.com or add Dolphin Skype ID: dolphin.data.lab
Dolphin Data Lab has both USB to SATA adapter and SATA to USB adapters and some users want to learn about the difference between these two adapters.
HDD USB-SATA Adapter Pro. is one very helpful adapter connecting both 2.5″ and 3.5″ SATA hard drives to your computer by one USB3.0 cable to an available USB 3.0 port on your desktop or laptop.
With this adapter, you can use the SATA drives as the portable drives, very convenient to use.
Users can connect SATA drives to DFL-URE or DFL-URE plus data recovery equipment and then users can image the sata drives or extract the lost data from SATA drives.
Universal SATA-USB Adapter Pro.
Universal SATA-USB Adapter Pro. is specially designed to work with DFL-SRP data recovery hardware or DFL-PCIe data recovery express or similar data recovery hardware tools to connect USB devices for disk imaging or file extraction. These data recovery hardware tools have SATA/IDE ports but don’t have USB ports.
With this adapter, users can easily connect external hard drives, USB flash drives, With Universal SATA-USB Adapter Pro. and NVME to USB adapter, DFL-SRP or DFL-PCIe or other similar data recovery hardware tools are able to image or extract lost data from NVME SSDs too.
Any question is welcome to sales@dolphindatalab.com or add Dolphin Skype ID: dolphin.data.lab
