DFL-DE Data Recovery Tool Is To Be Released Soon

DFL-DE is the 2012 latest revolutionary data recovery tool used for all hdd brands.  This data recovery tool contains combined data recovery software and hardware, without hardware, you cannot run the software separately. Read more

/by

2012 Top 15 Data Recovery Technologies

1：Force Loading Data Recovery Technology

‘Force Loading’ helps to fix many damaged WD hdds which spin up and down and their SA areas cannot be accessed. Force Loading’ is one creative hdd repair feature enables direct access to safe mode and have the clicking hard drive spinning up and then access to the firmware area and fix the firmware damage. This is one perfect and quick way to help users repair WD clicking hard drives by firmware failure. Read more

/by

DFL-WD II Installation Guides

This article will teach users of DFL-WDII hdd repair tool in details on how to install the program successfully in several simple steps.

First, you need to get our latest DFL-WDII setup program, let’s have the Version 2.3.5 set up program as example to go with the following steps: Read more

/by

2012 New Data Recovery Tools Development Plan

Dolphin Data Lab is one of the most professional manufacturers and suppliers of data recovery tools and hdd repair tools and we began data recovery business from data recovery services by using different data recovery tools and our own DIY data recovery solutions and until recent two years, we planned to develop our own commercial data recovery tools  and have them available to the international market. Read more

/by

Selftest With DFL-WDII For High-success-rate HDD Repair

,

With DFL-WDII hdd firmware repair tool, you are able to perform a high-success-rate of selftest and hdd repair. Read more

/by

HDD Repair Steps of DFL-WDII To Kill Zones For WD HDD ROYL Series

With DFL-WDII hdd firmware repair tool, users are able to kill zones with bad sectors or zones with bad heads.

You need firstly locate the bad sectors or bad heads by scanning the hdd and then use CHS<>LBA for conversion. After that, you can record the zone information of bad sectors so that you can move forward to ‘Kill Zone’ interface. Read more

/by

Special HDD Repair Tips for Common FW and ROM Repair

DFL-WDII ‘Common FW and ROM Repair’ is one advanced hdd repair function for advanced users and we are here offering some general steps or ideas to run it.

When you are facing detailed hdd repair cases, you need to consider more and make best use of the common FW and ROM repair resources we offer on our website.

‘Common FW and ROM Repair’ Tips

Before you read the following instruction, it’s important to read this basic hdd repair steps with this function. The following are two situations to be used with ‘Common FW and ROM Repair’ function.

  • If undetected->Load Overlay/load ATA module->Format the firmware area->Load OVL->Write New DIR module/Module 01->Write Full Firmware Modules->Selftest
  • If detected->Write ROM>Restart the HDD->Write New DIR Module/Module 01->Power Off and Power On->Write Full FW Modules->Selftest

 

/by

HDD Repair Tips Of DFL-WDII Common FW and ROM Repair

,

Within the new version of DFL-WDII HDD firmware repair tool, we added Common FW and ROM Repair function. This function is used to write the common firmware resources offered by DFL. Please do note that if you write other firmware resources with this function, you may cause severe damage to the HDD. Read more

/by

New Version Of DFL-WDII HDD Firmware Repair Tool Is Available

Dear Clients of Dolphin Data Lab, we are proud to announce the new version of DFL-WDII HDD firmware repair tool.

Version No.: 2.3.5
Release Date: July 4, 2012
Read more

/by

How To Run ARCO With DFL-WDII HDD Repair Tool

What is ARCO?

[protect password=”greendolphin”]

ARCO-Advanced Read Communication Optimization. ARCO is usually used when the FW modules have a total replacement, otherwise, you don’t need to run ARCO at all or you may run the ’46 Optimize’only.

Steps to Run ARCO

Run ‘Initialization’ under ‘Online ARCO’ so that all the adaptive parameters, zone parameters, etc can be set to default and all logs will be cleared automatically;

Generation orders to run ARCO is to run ‘6f Optimize’,’6a Optimize’, ‘6b Optimize’,’69 Optimize’,’46 Optimize’. For some drives, you may run ‘6a Optimize’before ‘6f Optimize’if you fail to run ‘6f Optimize’in the beginning.

“One Button ARCO” is a combination of 6B TPI(Density) Correction, 69 Capacity Settings and 46 Optimize. Below ‘One Button ARCO’ in the DFL-WDII hdd repair program, you can find five separated Selftest processes and they are ‘6F Optimize’-TouchDn Correction, ‘6A Optimize’-GAP R/W Correction, ’46 Optimize’-Complete Channel Optimization, ’69 Optimize’-Capacity Settings, ‘6B Optimize’-TPI Correction.

[/protect]

ARCO Notes

Among them, 6F and 6A are for head optimization to enhance the head R/W capabilities. Read more

/by