Company Blog
Seagate works in two modes: ATA mode and COM mode, DFL-SRP USB3.0 for Seagate can repair both old 7200.10 and before, and new Seagate F3 hard drives. Users can Edit model number, SN, remove password, repair bad sectors, repair firmware failures, etc with DFL Seagate firmware repair tool. This article is mainly introducing how to […]
To repair Seagate hard drives, DFL-SRP USB3.0 for Seagate is the best choice. To diagnose the Seagate damaged hard drives, the most important part is to find the failure reason. To diagnose the Seagate hard drive by COM port is very important and basic for repairing Seagate hard drives. Today when the engineer connected one […]
This is one data recovery case offered by Dolphin Bangladesh local sales and support center, the engineer was using the DFL-SRP USB3.0 for data extraction to detect the 8TB Seagate hard drive and recover the data. Within the SRP DE interface, the engineer could easily connect the COM cable and enter the COM terminal mode […]
Dolphin Data Lab has recently worked closely with Data Recovery CI in Ivory Coast and it has been set up as the local sales and support center. DATA RECOVERY CI is a professional and enterprising data recovery company located in Abidjan, Cote d’Ivoire, also known as the famous Ivory Coast in French. After a long […]
This is one Seagate ST3320813AS hard drive data recovery case study, recovering lost data from capacity 0 Seagate drives. To recover lost data from Seagate hard drives, the very first thing users need to learn is to connect the COM port and get the terminal mode working. Users need to enter the T> or F3 […]
