This is another successful remote data recovery case study from patient western digital hard drives with bad sectors in service area.
When the patient drive was connected to pc, it is not detected at all but when it’s connected to DFL-SRP wd firmware repair hardware, it’s detected but capacity was 0 and spun down after spinning up for seconds. Read more
There are more and more partial sector access for Seagate Mobile LM hard drives such as the LM007, LM012, LM035, etc. There’re different types of partial sector access types.
This is one successful ST2000LM007 Partial Sector Access Data Recovery case study. Dolphin engineer has helped one DFL user in USA recover 100% data from this patient drive. Read more
This is one successful remote data recovery case study for one DFL user in USA.
According to the user’s report, the patient drive could be properly detected and was able to enter F3 T> but when he tried to image the hard drive, he could only image 70% around of the drive and the last 30% of data was blocked. If the user tried to scan the bad sectors, full of bad sectors was found. Read more
This is one physical western digial head swap data recovery case.
When the case was received, users request Dolphin data recovery engineers to check remotely. By entering safe mode of the hard drive, the engineer could backup the ROM and run SA Bypassing function. Read more
In this summer season 2018, more and more Dolphin users worldwide come to Dolphin head office in China to attend the advanced hard drive data recovery training courses.
These users cannot only enjoy their summer holiday by seeing one different great China, the most important, users can learn and improve their data recovery skills for faster data recovery and higher-success-rate data recovery from firmware and physical damaged hard drives. Read more
For WD hard drives which is undetected and capacity 0, it is not easy for common data recovery companies without professional firmware repair tools or it is impossible case for data recovery software solutions.
When the patient drive was powered on, the drive had no physical damage symptoms but when trying to detect the hard drive ID information, it failed and the hard drive model, SN, firmware version and SPT were not available and the capacity was 0. Read more
