You can view the DFL case studies and FAQs here so that you can understand how to use the DFL data recovery tools better

This is one data recovery case study on how to recover lost data from Hitachi 7250A7 firmware damaged hard drives. When trying to connect the hard drive and scan the hard drive, it shows source drive ID read error with error register on. Click virtual translator and after the operation is done, the hdd becomes ready without error. Read more

WD HDD Auto Repair is one very famous hdd repair tool from Dolphin Data Lab but most people use it for hdd refurbishing purpose to remove bad sectors and clear smart. This article will introduce how to use this tool for data recovery purpose. Read more

Many new Seagate F3 hard drives have one new feature: Diagnostic Port Locked. When users try to repair the Seagate F3 hard drive using common methods and commands, users will meet a big problem, the commands won’t run and the hdd reports the famous Diagnostic Port Locked. In such condition, the hdd cannot be repaired or recovered. Read more

Many people lose their valuable data by accidental format and after the format, users can find none data in their windows drives.

One question: if users format the drives, the data is really formatted and lost forever? The answer is no. Read more

Many data recovery engineers worldwide are using DFL-URE USB3.0 data recovery equipment to recover lost data from USB hard drives. However, few of them are aware of one fact DFL-URE USB3.0 can be used to recover data from USB flash drives too. Read more

Dolphin data recovery engineer met one interesting Seagate hdd recovery case belonging to 5400.6 Series-ST9500325AS.

When this case was received, the client told our engineer his external hdd dropped to the hdd and couldn’t be detected any more in his pc and no data is available. Read more

Undetected WD USB my passport hard drive recovery is very common data recovery case appearing in many data recovery labs. To recover lost data from USB hard drives, DFL-URE is the ideal data recovery equipment for easy recovery.

This is one WD USB hard drive-My Passport data recovery case study shared by one Australia Dolphin user. Read more

Contaminated dead hard drive data recovery is always one hot topic and hot potato for all data recovery engineers because data recovery engineers can charge a high price on these cases but the success rate is low and to get lost data from these dead hard drives is very time-consuming.

This case is shared by Dolphin Bangladesh sales and support center-Data Recovery Station and they have successfully recover the lost data from one very dirty contaminated hard drive using Dolphin data recovery tools. Read more

Seagate works in two modes: ATA mode and COM mode, DFL-SRP USB3.0 for Seagate can repair both old 7200.10 and before, and new Seagate F3 hard drives. Users can Edit model number, SN, remove password, repair bad sectors, repair firmware failures, etc with DFL Seagate firmware repair tool.

This article is mainly introducing how to fix translator damaged Seagate hard drives by DFL Seagate firmware repair tool. Read more

To repair Seagate hard drives, DFL-SRP USB3.0 for Seagate is the best choice. To diagnose the Seagate damaged hard drives, the most important part is to find the failure reason.

To diagnose the Seagate hard drive by COM port is very important and basic for repairing Seagate hard drives. Today when the engineer connected one Seagate hard drive, the engineer opened the COM port and enter the COM terminal window, power on the hard drive, the terminal outputs the following messages: Read more